smd led lamp bl - ls 2012 b 0e1 approved : xu l checked : zhang wh drawn: li fs rev n o: v.2 page 1 of 6 www.betlux.com email: sales@betlux.com , betlux@betlux.com features: ? 2.0mmx1.25mm smd, 0.8mm thickness ? mono - color type ? compatible with automatic placement equipment ? wide viewing angle. ? ideal for backlight and indicator. ? package: 4 kpcs/reel ? rohs compliance n electrical - optical characteristics: (ta=25c) (test condition: if=20ma) chip forward voltage(vf) unit:v luminous intensity (iv) unit:mcd part number emitted color material l p (nm) lens type typ max min. typ. viewi ng angle 2?1/2 (deg) bl - ls 2012 b 0e1 hc red gap 700 2.2 2.7 0.3 0.9 bl - ls 2012 b 0e1 src super red algaas 660 1.85 2.30 5 13 bl - ls 2012 b 0e1 lrc super red algaas 660 1.85 2.30 10 28 bl - ls 20 12 b 0e1 ec red gaasp 640 2.10 2.70 1 6 bl - ls 2012 b 0e1 yc yellow gaasp 583 2.15 2.70 1 6 bl - ls 2012 b 0e1 gc green gap 568 water clear 2.30 2.70 6 15 130 n absolute maximum ratings (ta=25c) parameter h sr lr ur e y g unit forward current i f 30 30 30 30 30 30 30 ma powe r dissipation p d 65 78 78 78 65 65 65 mw reverse voltage v r 5 5 5 5 5 5 5 v peak forward current i pf (duty 1/10 @1khz) 100 100 100 100 100 100 100 ma operation temperature t opr - 30 to +80 c storage temperature t stg - 40 to +85 c lead soldering temp erature t sol max.2605 c for 3 sec max. (1.6mm from the base of the epoxy bulb) c
smd led lamp bl - ls 2012 b 0e1 approved : xu l checked : zhang wh drawn: li fs rev n o: v.2 page 2 of 6 www.betlux.com email: sales@betlux.com , betlux@betlux.com n electrical - optical characteristics: (ta=25c) (test condition: if=20ma) chip forward voltage(vf) unit:v luminous intensity (iv) unit:mcd part number emitted color material l p (n m) lens type typ max min. typ. vie wi ng angle 2?1/2 (deg) bl - ls 2012 b 0e1 udr ultra red algaas 655 2.10 2.50 22 55 bl - ls 2012 b 0e1 uhr ultra red algaas 645 2.10 2.60 30 80 bl - ls 2012 b 0e1 uec ultra red algaas 630 2.10 2.50 30 7 0 bl - ls 2012 b 0e1 uhd ultra red algaas 618 2.10 2.60 50 110 bl - ls 2012 b 0e1 uyo ultra amber algainp 610 2.10 2.60 30 70 bl - ls 2012 b 0e1 uyc ultra yellow algainp 593 2.10 2.60 25 75 bl - ls 2012 b 0e1 ugc ultra green algainp 575 2.20 2.70 10 45 bl - ls 2012 b 0e1 pgc ultra pure green ingan 525 3.50 4.20 50 100 bl - ls 2012 b 0e1 bgc ultra bluish green ingan 505 3.50 4.20 50 110 bl - ls 2012 b 0e1 dnb blue ingan 470 3.50 4.20 10 38 bl - ls 2012 b 0e1 ubc ultra blue ingan 470 3.50 4.20 10 30 bl - ls 2012 b 0e1 uwc ultra white in gan / water clear 3.50 4.20 40 200 130 n absolute maximum ratings (ta=25c) parameter udr uhr ue uhd uyo uy ug pg bg dnb ub uw unit forward current i f 30 30 30 30 30 30 30 30 30 30 30 30 ma power dissipation p d 78 78 78 78 78 78 78 78 78 78 78 78 mw reverse voltage v r 5 5 5 5 5 5 5 5 5 5 5 5 v peak forward current i pf (duty 1/10 @1khz) 100 100 100 100 100 100 100 100 100 100 100 100 ma operation temperature t opr - 30 to +80 c storage temperature t stg - 40 to +85 c lead soldering temperature t sol max.2605 c for 3 sec max. (1.6mm from the base of the epoxy bulb) c
smd led lamp bl - ls 2012 b 0e1 approved : xu l checked : zhang wh drawn: li fs rev n o: v.2 page 3 of 6 www.betlux.com email: sales@betlux.com , betlux@betlux.com n package configuration & internal circuit diagram notes: 1. all dimensions are in millimeters (inches) 2. tolerance is 0.25(0.01")unless otherwise noted. 3. specifications are subj ect to change without notice.
smd led lamp bl - ls 2012 b 0e1 approved : xu l checked : zhang wh drawn: li fs rev n o: v.2 page 4 of 6 www.betlux.com email: sales@betlux.com , betlux@betlux.com n tape specifications 1.00 ? 0.01 unit o mm tolerance o ? 0 . 1 9 ps 5 8.00?0.20 1.75?0.10 3.50?0.05 1.40 ? 0.10 4.00?0.10 4.00?0.10 2.00?0.05 1.50+0.10/-0 cathode mark 2.30 ? 0.10 1.10 ? 0.10 0.23?0.05 178?1.0 60+0.5/-0 13.5?0.5 9.0?0.5 12.0?0.15 label sticking position
smd led lamp bl - ls 2012 b 0e1 approved : xu l checked : zhang wh drawn: li fs rev n o: v.2 page 5 of 6 www.betlux.com email: sales@betlux.com , betlux@betlux.com n typical electrical - optical characteristics curves: 1.0 0.5 0 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 (a) (b) (c) (d) (2) (3) (8) (4) (1) (6) (5) (9) (10) wavelength(nm) relative intensity vs wavelength() ? p (1) - gaasp/gaas 655nm/red (2) - gap 570nm/yellow green (3) - gaasp/gap 585nm/yellow (4) - gaasp/gap 635nm/orange & hi-eff red (5) - gap 700nm/bright red (6) - gaalas/gaas 660nm/super red (8) - gaasp/gap 610nm/super red (9) - gaalas 880nm (10) - gaas/gaas & gaalas/gaas 940nm (a) - gan/sic 430nm/blue (b) - ingan/sic 470nm/blue (c) - (d) - ingan/sic 505nm/ultra green ingaal/sic 525nm/ultra green 50 40 30 20 10 0 1.2 1.6 2.0 2.4 2.6 3.0 1 6 3 4 5 2 8 4.0 3.0 2.0 1.0 0 20 40 60 80 100 1 5 b 50 40 30 20 10 0 20 40 60 80 100 1 6 2,4,8,a 3 5 3 2 1 0.5 0.2 0.1 -30 -20 -10 0 10 20 30 40 50 60 70 1 5 4 2 3 10 9 8 7 6 5 4 3 2 1 1 10 100 1000 10,000 10khz 3khz 1khz 300khz 100khz f-refresh rate 100khz 30khz 10khz 3khz 1khz 300hz 100hz 10 9 8 7 6 5 4 3 2 1 1 10 100 1000 10,000 forward voltage (vf) forward current vs. forward voltage relative luminous intensity vs. forward current ambient temperature ta() ?? forward current vs. ambient temperature tp-pulse duration us (1,2,3,4,6,8,b.d.j.k) note:25 free air temperature unless otherwise specified ?? tp-pulse duration us f o r w a r d c u r r e n t ( m a ) forward current (ma) r e l a t i v e l u m i n o u s i n t e n s i t y f o r w a r d c u r r e n t ( m a ) r e l a t i v e l u m i n o u s i n t e n s i t y ambient temperature ta() ?? (5) i p e a k m a x . i d c m a x . i p e a k m a x . i d c m a x .
smd led lamp bl - ls 2012 b 0e1 approved : xu l checked : zhang wh drawn: li fs rev n o: v.2 page 6 of 6 www.betlux.com email: sales@betlux.com , betlux@betlux.com n packing and weighting 4 000p cs /reel 1 reel / b ag maximum 10 bags / inner b ox 3 inner b ox /box 9 inner b ox /box
|
